WE-EF RMC320 LED, Инструкция по установке и обслуживанию

Страница: 5 / 8

4
Installation Procedure
Installation – Pole
1) Switch off mains electrical supply.
2) Check that rating shown on luminaire label conforms
with mains electrical supply.
3) Feed mains cable C into column D , while setting
bracket/luminaire assembly in position. Tighten
screws E .
4) Trim mains cable C to the desired length and con-
nect the leads to their respective terminals at the
base of the pole (L = Phase, N = Neutral,
= Earthing)
Installation – Wall bracket
1) Switch off mains electrical supply.
2) Check that rating shown on luminaire label conforms
with mains electrical supply.
3) Access mounting ƃ ange J by loosening screws K .
4) Determine positions for Ƃ xing screws L . Ensure
arrow mark R on ƃ ange J aims upwards. Drill rele-
vant holes and insert wall plugs M .
Warning: Ensure not to damage any electric cable,
water pipe or other devices while drilling holes.
5) Feed mains supply cable N (and second cable for
through wiring, if required) through packing ring(s)
O , while setting and securing mounting ƃ ange J
in position. The pre-installed packing ring(s) O are
suitable for cable diameters 7 to 9.5 mm. For larger
cable diameters (9.5 to 12 mm) use the auxiliary
packing ring(s). Tighten pressure screws S .
To secure mounting ƃ ange J , insert screws L , and
tighten.
6) Connect mains supply cable N to the respective
terminals in terminal connectors P (L = Phase,
N = Neutral, = Earthing)
7) Position luminaire/wall bracket Q by attaching
to mounting ƃ ange J and secure in position by
tightening screws K .