5) Cut the connecting line and connect to the res-
pective terminals in the terminal connector
H
(N = neutral, L1 = phase, = earthing).
Check that rating shown on the luminaire label
conforms with the mains electrical supply.
6) Close cover
E
and firmly tighten screws
D
.
2) Loosen screws
B
and remove luminaire
A
. Lead
the connecting cable through the wall fixing and
fasten to the wall with suitable fixing material
I
(not supplied by WE-EF).
3) Loosen screws
D
and open cover
E
.
4) Lead the connecting cable through the cable
gland inside the luminaire. Attach luminaire on
to wall fixing
A
and firmly tighten with screws
B
.
Firmly tighten cable gland
C
.
Installation Procedure
1) Switch off the mains electrical supply.
H
I
B
H
D
E
A
I
C
B
