Installation Procedure
1) Switch off the mains electrical supply.
A
B
2) Remove mounting flange
A
by loosening
screws
B
.
3) Check that rating shown on luminaire label
conforms with mains electrical supply.
(example)
12/17 IP66
FLC121 LED
120-277V / 60 Hz
145-XXXX
SOE XXXXXXX
LED 3000K 12W item no. XXX
Installation
The product must be installed and maintained by
a suitably qualified professional in compliance with
latest building/construction and/or electrical regu-
lations and relevant legislation.
Attention:
Switch off mains electrical supply prior
to installing and connecting the luminaire. Do not
open luminaire while mains supply is switched on.
Notice:
If the luminaire is modified by anybody
other than the original manufacturer, then the
warranty will no longer be valid and shall become
the full responsibility of the modifying person/
organisation. Claims based on defects attributable
to improper installation and/or application, and the
consequences thereof, are excluded.
In case of component failure, LED replacement
due to abnormal circumstances or at end of life,
replacement must be carried out by a suitably qua-
lified and trained professional.
In case of questions please contact our technical
hotline: +1 724 742 0030 (from Monday - Friday
from 08.00 until 16.00 hours).
Maintenance
Apart from cleaning the product’s exterior surfaces,
no special maintenance work is required. Do not
use high-pressure cleaners.
Protect our environment: Discard used LEDs in
compliance with the most recent environmental
legislation.
A
D
H
G
4) Seperate mounting flange
A
from junction box
mounting plate
H
by removing fasteners
D
.
Mount plate over junction box with mains
supply cable
G
.
Attention:
Ensure not to damage any electrical
cable, water pipe or other items during installa-
tion.
