5) Firmly tighten cable gland
F
.
6) Put in gear-tray, close plug connection
D
and
close gear-tray. Make sure that the gear-tray is
firmly shut.
7) Close frame
A
and firmly tighten screws
B
.
8) Install the bracket
G
to the floodlight by using
the two knurled head screws
H
and the allen
screw
I
.
9) The fastening of the floodlight to the pole
depends on the type of chosen bracket. Make
sure that the floodlight is installed to the bra-
cket with two M10 screws and self-locking nuts
made of stainless steel.
Installation Procedure
Luminaire prewired, do not open!
1) Switch off the mains electrical supply.
2) Loosen screws
B
and open frame
A
.
3) Unlock shutter
C
and turn down the gear-tray,
disconnect plug connector
D
and remove the
gear-tray.
4) Cut the connecting cable
X
corresponding to
the height of the pole and insert it through the
cable gland
F
inside the luminaire.
Connect the neutral conductor (N), phase (L1)
and the earthing to the corresponding mar-
ked contacts of the terminal clamp
D
.
Compare the local voltage and frequency with
the data mentioned on the label of the luminaire.
I
G
C
D
II
B
A
H
F
X
G
