5
5) Feed mains supply cable
C
(and second cable
E
for through wiring) through holes inside
blockout.
6) Replace blockout cover prior to luminaire
installation to prevent tripping hazard/
concrete dirt getting into blockout.
7) Blockout needs to get placed on an even, stable
DUHD7RSHGJHQHHGVWREHƃXVKZLWKVXUIDFH
Attention:
,IƃRRUZLOOEHWLOHGRUSDYHG
afterwards leave an appropriate gap. In case
luminaire gets installed at a later time, blockout
must get covered by installation cover
A
, to
make sure no concrete or dirt may enter
luminaire. Installation cover ensures that
blockout does not get damaged during masonry
works and needs to remain inside blockout until
installation of luminaire.
8) Framing should be installed to prevent vegeta-
tion from growing over the lens.
Frame
