UP35-4481N26000-02/15
– REV.B1
Page 58 / 63
10
Problem Handling and Fault Diagnostics
DANGER
+
Due to the risk of hand or finger injury, never try to reach into the machine before having
assured that the machine is disconnected from the air supply. Disconnect the air supply
before changing the safety guard, the adapter and the dies.
CAUTION
+
Before starting maintenance, disassembly or repair work, the crimping machine must be
disconnected from air supply.
+
Maintenance work may be performed only by authorized and properly trained staff. The
housing and the covers in particular may only be removed by specially trained staff.
+
When working with the pneumatic Parallel Crimp Machine UP 35, do not wear loose
clothing, jewellery or long, loose hair that can get caught in the pneumatic Parallel Crimp
Machine UP 35.
+
Work with caution.
+
Before commissioning the machine, it is always important to check whether all safety
devices, especially the safety guards and die adapter, are installed and are functioning
correctly.
+
Check the release button before starting the work on the crimp machine. In the case of
imminent danger immediately press the release button. The release button must be within
the direct reach of the operator. It must not be covered.
INFORMATION
+
In case of a blockade of the dies press the release button and disconnect the machine
from air supply.
In the event of a problem our customer service personnel will be able to help you.
Service address:
WEZAG GmbH
Werkzeugfabrik
Wittigstraße 8
35260 Stadtallendorf
Telephone: +49 6428 704-0
Please have the following information ready when you contact service.
+
Machine Type
+
Machine Serial Number
