WDT GRANUDOS Flex-CPR Touch XL Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 82

background image

Dosing unit GRANUDOS Type Flex-CPR Touch XL,
Type Flex-Touch and Type Flex-S5

Index: 01 Change date: 11/10/2023

OI No.: BA SW 022-01 Granudos Flex Dosiereinheit EN.docx

Page 4 of 68

1

About these instructions / general

1.1

Scope of applicability

These instructions describe the function, installation, commissioning and operation of the GRANUDOS
Flex-CPR Touch XL, Flex-Touch and Flex-S5 dosing device along with the corresponding accessories.
The Operating Instructions must be read carefully before use and kept on the device for direct use!
These Operating Instructions are valid in conjunction with the Operating Instructions:



“CPR-Touch XL Measuring and Control Unit” No. BA MR 001 or



“GRANUDOS Touch Control Unit” No. BA SW 010 or



“GRANUDOS S5 Control Unit” No. BA SW 014.

1.2

Target group

Only our instructed partners and people who have been trained in the device functions are permitted
to work on the system, provided that they have read and understood these Operating Instructions.
Electrical connection work may only be carried out by appropriately trained specialists!

1.3

Symbols used

This document uses the following types of safety notices as well as general notices:

DANGER!

“DANGER” denotes a safety notice which, if disregarded, will lead to serious or life-threat-
ening injuries or death!

DANGER DUE TO CORROSIVE SUBSTANCES!

This safety notice denotes risks which, if disregarded when handling chemicals, will lead to
serious or life-threatening injuries or death!

WARNING!

“Warning” denotes a safety notice which, if disregarded, may lead to serious or life-threat-
ening injuries or death!

CAUTION!

“Caution” denotes a safety notice which, if disregarded, may lead to injuries!

ATTENTION!

“ATTENTION” denotes a safety notice which, if disregarded, may lead to material damage
or may impair the function of the system!

ATTENTION! ESD SENSITIVE COMPONENTS!

“ESD SENSITIVE” denotes electronic components that may be damaged by electrostatic dis-
charges.

The generally accepted safety precautions for electronic components must be observed
when handling the devices!

«
...
2
3
4
5
6
...
»

Содержание GRANUDOS Flex-CPR Touch XL



















































































Отзывы:

Нет отзывов

Похожие инструкции для GRANUDOS Flex-CPR Touch XL

Бренд: Naked Страницы: 36

Бренд: National Instruments Страницы: 10

Бренд: P-Q Controls Страницы: 5

Бренд: Ultimate Healthcare Страницы: 2

Бренд: Ultimate Healthcare Страницы: 40

Бренд: Kärcher Страницы: 148

Бренд: Toro Страницы: 4

LUNAQUA Classic LED

Бренд: Oase Страницы: 16

Бренд: AGI Страницы: 33

Turbo Jet 10 i-CON

Бренд: Stocks AG Страницы: 30

Бренд: E-LINK Страницы: 4

Бренд: Furuno Страницы: 20

Бренд: Trojan Страницы: 12

100 Series Z Master

Бренд: Toro Страницы: 28

Бренд: Laserworld Страницы: 4

Matrix N Series

Бренд: Datalogic Страницы: 44

Бренд: Pro-Form Страницы: 36

Бренд: 3M Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды