operation manual
DUFTDOS AK-I
page 3 of 5
Push the plug into the power socket – aromatization starts according to the
adjusted cycle.
The function of the compressor is indicated by the yellow LED. The readiness for
operation by a green one at the controller.
4.
Adjustement of the aromatization peformance
The aromatization intensity is adjusted on two types:
-
Aromatization time (operation time of the blower) is adjusted by a
jumper on the inside controller plate. Calibration ex works is 10
seconds. If there will be a greater demand for fragrance calibrate the
jumper (operation time 20 seconds).
-
The rotary knob at the housing is to adjust a break time for the blower:
Adjustment from „2,5min“ – „10min“, position „0“ means non-stop run of
the blower and so max aromatization intensity.
example:
adjustment jumper: 10 sec.
adjustment rotary knob: 5 min.
After switching the unit on the blower blows for 10 sec. Then there is a break of
5min. Than blower starts again for 10 sec.
10 Min.
7,5 Min.
0
2,5 Min.
5 Min.
pause time
