Fragrances dosing, type DUFTDOS 0-T
Index: 02
Change date: 01/07/2020
Operating instructions no.: BA DW 016-02 Duftdos-0-T EN 16621-17551.docx
Page 6 of 24
3
Product description - delivery scope
Delivery scope / accessories
The device mainly consist of the following components:
Hose dosing pump SA, approx. 3l/h
Connection cable 4 x 0.75mm
2
- 3m
Roller carrier SA yellow
Dosing hose 3.2 x 1.6 Viton with hose holder on 4 x 1 mm
Suction hose PE 4 x 1 - 1.5 m
The following options are available as accessories:
Dosing set
Console for round jar with wide neck, 1.5 litres
Console for canister, 10 litres
Order numbers see Section 9.6 „Spare parts list, wearing parts list, consumables list“.
Product description
The fragrance dosing type DUFTDOS-0-T refers to a dosing system for the dosed introduction of fragrance
concentrate in the steam pipe of steam rooms.
Function
The fragrance concentrate is dosed through the hose pump passing the dosing pipe into the steam pipe. The
pump must be connected in such a way that it can only dose during the steam production. The dosing power
is not adjustable. With the test button the dosing pump is operated in the test run. Here the device is dosing
continuously. This is done to aerate the dosing pipe between device and steam pipe. The dosing pipe is made
of transparent PTFE, so that during the deaeration the air bubble in the pipe can be observed.
The optional dosing valve is assembled into the dosing pipe to connection the dosing power.
ATTENTION !
The device must be connected in such a way that dosing is only done during the steam
production of the steam generator.
