WDS P20, Инструкция по установке и эксплуатации

Страница: 14 / 32

10
In most cases, these steps alone will be sufficient to complete the instal-
lation. Should further information be required, contact Wireless Data
Systems at the number given on the inside back cover of this manual.
5.1 Redundant Transceiver Chassis Shipment
Figure 6 shows the contents of a typical Redundant Transceiver Chassis
shipment.
Invisible place holder
Figure 6. P20 Redundant Transceiver Chassis typical shipment
5.2 Installation Overview
NOTE:
The internal back-up battery (if equipped) is disconnected for
shipment. It is important to remove the P20 top cover and
connect the battery to the battery control board for the battery
back-up to function. Refer to Figure 7.
POWER CORD(S)
(AC cord shown)
REDUNDANT STATION
INSTALLATION &
OPERATION GUIDE