background image

Terms of warranty - USA / Canada

1. General Express Warranties. 
WDP  warrants to the buyer who is purchasing to 
place into use (Buyer) only, that the ANGEL (Product) 
shall be free from material manufacturing defects 
in materials and workmanship for six months from 
the date of purchase, subject to the requirements, 
disclaimers and limitations of this Warranty. This is 
not a Warranty of performance, but a limited Warranty 
as to the condition of the Product at the beginning 
of the Warranty period, this Warranty is only against 
such defects and not against any other failures 
such as, but not limited to, those due to wear and 
tear, exposure to the elements, unusual operating 
environments, misuse, negligence, accident, 
alteration or repair in any respect which, in the 
judgement of WDP , adversely affects the condition 
or operation of the Product. Normal maintenance 
and perishable items such as seals, batteries, wiring, 
indicator lamps and exhaust valves are excluded 
from this limited Warranty against defects. This 
Warranty is not transferable and it may not be waived 
or expanded except in writing signed by WDP  The 
terms and limitations of this Warranty shall also apply 
to any additional goods or information, which may be 
distributed by WDP , relating to the ANGEL. 
2. Disclaimer and Limitation of Express and Implied 
Warranties.
There are no express Warranties other than 
those contained in this Warranty. Whether or not 
the Product is to be used exclusively by Buyer, 
there shall be no third party beneficiaries to this 
Warranty herein. NO WARRANTY IS PROVIDED TO 
DISTRIBUTORS OR DEALERS EXCEPT AS MAY BE 
EXPRESSLY PROVIDED IN A SEPARATE AGREEMENT 
OF SALE. All descriptions, illustrations of the Product 
and other information in catalogues, brochures and 
price lists or otherwise provided by WDP or others 
are intended for general information only. WDP , is 
not responsible for any errors or omissions therein 
or for any loss or damage resulting from reliance 
on them. WDP , does not warrant that the Product 
is in compliance with any law or industry standards, 
guidelines or procedures. WDP  standard terms 
and conditions of sale also apply if Buyer is a direct 

purchaser from WDP  WDP  DISCLAIMS ALL IMPLIED 
WARRANTIES INCLUDING, BUT NOT LIMITED TO, 
THOSE OF FITNESS FOR A PARTICULAR PURPOSE 
AND MERCHANTABILITY. 
3. Remedy and Limitation of WDP  liability.
Defective or non-conforming Product or parts thereof 
discovered and returned to WDP  freight prepaid, 
with proof of purchase, during the Warranty period 
shall be repaired or replaced by WDP  without any 
additional charge and shipped to Buyer, FOB WDP  In 
lieu of repair or replacement, if WDP  elects, WDP  
may, upon return of such product and making a 
determination of non- conformity or defect, keep the 
product and refund the purchase price paid by Buyer. 
Buyer’s remedies shall be limited (even in the event of 
WDP  default of its Warranty obligations) exclusively 
to those provided in this Warranty. UNDER NO 
CIRCUMSTANCES SHALL WDP  OR ANY SUPPLIER, 
DISTRIBUTOR, DEALER, OR OTHER PERSON BE 
LIABLE FOR EXEMPLARY, PUNITIVE, CONSEQUENTIAL 
OR INCIDENTAL DAMAGES, NOR FOR ANY AMOUNT 
IN EXCESS OF THE BUYER’S PURCHASE PRICE. Buyer 
waives any causes of action or theories of liability 
including, but not limited to, those arising under 
contract, tort, strict liability, Product liability, statutes, 
or otherwise, except as to those specifically provided 
by the Uniform Commercial Code (as adopted in 
Michigan) as excluded, modified and limited in this 
warranty. 
4. Additional Consumer Protection.
The products are offered for sale for end use in 
supervised commercial establishments where 
professional safety codes are enforced, and not for 
personal, family or household use. Nevertheless, if 
the Product is determined in a transaction to be a 
customer Product under applicable law, the following 
provisions shall become applicable: 
(a)  THE IMPLIED WARRANTIES OF MERCHANTABILITY 

OR FITNESS OF THE PRODUCT FOR A 
PARTICULAR PURPOSE THAT CANNOT BE 
DISCLAIMED ARE LIMITED IN DURATION TO THE 
INITIAL EXPRESS WARRANTY PERIOD.

(b)  Some states do not allow limitations on how long 

Содержание ANGEL





































Отзывы: