background image

ADHERE STRICTLY TO THESE

AND ALL OTHER SAFETY

INSTRUCTIONS AND GUIDELINES

·  Ensure a barrel blocking device is fitted to 

the ANGEL.  

·  Ensure the hopper is removed from the 

ANGEL.

·  Ensure that there are no paintballs in the 

ANGEL.

·  SHOULD YOU BE UNSURE AT ANY STAGE YOU 

MUST SEEK EXPERT ADVICE.

Parameters - Loader speed delay - MROF eyes on/off

•  

Push the navigation switch in to select the 

Parameters

 menu. 

•  

From the Parameters menu select the 

 De-Bounce 

 

feature by pushing the navigation switch inward.

•  

Scroll up or down through the 

De-Bounce

 settings 

by pushing the navigation switch up or down.

•  

Once the desired setting is reached press the 

navigation switch inwards to save the new setting.

Saved De-Bounce

 message will be displayed.

The Parameters menu will be displayed.  

 

Loader speed delay

This allows you to select the correct Angel eye 

settings for the type of loader that you are using. 

Once you have selected the correct setting the Angel 

eyes program will intelligently adjust itself to the 

variable speeds of your loader. 
1- 4 = 9v agitator type loaders
5 – 8 = 12- 18v agitator type loaders
9 – 12 force fed type loaders
13-16 only very fast modified force fed loaders

•  

Ensure that your loader is at its maximum 

performance and reliability otherwise you may 

encounter problems related to the loader.

•  

Selection of a loader speed setting that is too high 

may result in ball breakages.

• 

Ensure that the Angel is switched on.

• 

Ensure that you are not activating the trigger.

•  

Push and hold the navigation switch UP or DOWN 

for 1.5 seconds.

• 

The 

Status

 menu will be displayed.

•  

Push the navigation button up to highlight the     

i

Parameters  

 menu.

•  

Push the navigation switch in to select the 

Parameters

 menu. 

•  

From the 

Parameters

 menu select the  

 Loader Speed 

 feature by pushing the  

navigation switch inward.

•  

Scroll up or down through the loader speed settings 

by pushing the navigation switch up or down.

Once the desired setting has been reached press the 

navigation switch inwards to save the new setting.

Saved loader speed

 message will be displayed.

The 

Parameters

 menu will be displayed. 

MROF eyes on

This allows the user to set the Maximum Rate Of Fire 

whilst the Angel eyes are on. There are 20 levels  

of adjustment ranging from 10 to unlimited balls  

per second. 

• 

Ensure that the Angel is switched on.

• 

Ensure that you are not activating the trigger.

•  

Push and hold the navigation switch UP or DOWN 

for 1.5 seconds.

• 

The 

Status

 menu will be displayed.

•  

Push the navigation button up to highlight the 

i

Parameters 

 menu.

•  

Push the navigation switch in to select the 

Parameters

 menu. 

•  

From the 

Parameters

 menu select the  

MROF eyes on

 feature by pushing the  

navigation switch inwards.

•  

Scroll up or down through the 

MROF eyes on 

settings by pushing the navigation switch up  

or down.

•  

Once the desired setting has been reached  

press the navigation switch inwards to save  

new setting.

Saved MROF

 eyes on message will be displayed.

The 

Parameters

 menu will be displayed. 

 

MROF eyes off

This allows the user to set the Maximum Rate Of Fire 

whilst the Angel eyes are off. There are 20 levels  

of adjustment ranging from 10 to unlimited balls  

per second.

• 

Ensure that the Angel is switched on.

• 

Ensure that you are not activating the trigger.

•  

Push and hold the navigation switch UP or DOWN 

for 1.5 seconds.

• 

The 

Status

 menu will be displayed.

•  

Push the navigation button up to highlight the 

i

Parameters 

 menu.

•  

Push the navigation switch in to select the 

Parameters

 menu.

•  

From the Parameters menu select the  

i

MROF eyes off 

 feature by pushing the  

navigation switch inwards.

•  

Scroll up or down through the 

MROF eyes off 

settings by pushing the navigation switch up  

or down.

The Angels default values are 

Mode – semi
Soft break-out settings : seconds - 

10

Hard break-out settings: seconds - 

10

Soft ramp settings: start delay (shots) -  

4

 / kick in (bps) - 

5

 / Drop out (bps) - 

4

Hard ramp settings: start delay (shots) -  

4

 / kick in (bps) - 

5

 / Drop out (bps) - 

4

Dwell time (m/secs) - 

11

MROF eyes on limit – 

unlimited

MROF eyes off limit – 

15bps

De-Bounce (level) - 

10

Loader speed (level) - 

9

Angel eyes – 

ON

Game time set (mins/ Secs) – 

7:10

Alarm time set (mins/secs) – 

6:00

Parameters -  

Valve dwell - De-Bounce

Содержание ANGEL





































Отзывы: