wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
1
Assembly Instructions
Viola/Violin Rack
Tools Required
•
4mm Allen
Wrench OR
•
4mm hex bit
•
Phillips screw
driver
•
Screw gun
•
Square screw
driver
Step 1:
•
On a protected flat surface and with the help of another person, align the threaded inserts of the (lower)
rails
to the (lower)
brace
.
•
Using a 1/4”-20x1 3/4” joint connector bolt, insert the bolt going through the pre-drilled hole in the
rail
to the threaded insert of the
brace
. Use a 4mm Allen
wrench or 4mm hex bit and a screw gun to fasten the bolt into place. Repeat for the remaining (3) bolts.
•
After the first
rail
is attached to the
brace
, repeat for the remaining
rail
on the other side of the
brace.
•
Repeat this step with (upper)
rails
and (upper)
braces
.
NOTE:
Colored images are for illustrative purposes only.
V072121 Version subject to change
(Upper)
(Lower)
Rails w/ Armor
Edge (shown in
pink)
Braces (shown in
green)