manualshive.com logo in svg

WB Mfg TORO, Инструкция по сборке, Страница: 4 / 5

Поделиться
Скачать
WB Mfg TORO Скачать руководство пользователя страница 4

 4

wibenchmfg.com

507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303

Specifications are subject to change. Product 

images are for illustrative purposes only and may 

differ from the actual product.

Step 1: 

 

•  Remove Nylon glide from leg by rotating counterclockwise until glide is free. 

Step 2: 

 

•  Place stem of optional footing into the hole on the leg. Rotate clockwise 

until fully inserted into leg. (See next page if installing a 

•  Casters are 

NOT 

to be used as a leveling device.

Step 3:

•  Tighten with a 14mm open-ended wrench. (only with the Dual wheel soft 

tread locking caster.)

Step 4:

•  Repeat for each caster or glide. 

Part #

Description

Qty.

040164

13/8 Dia. Grand Hank glide, 3/8-16 x 1”

1 per leg

04067920

1.5” Soft Touch glide

1 per leg

NSL-33056S

1.25” Steel glide

1 per leg

04067540

Dual wheel soft tread locking caster w/brake

1 per leg

Part Identifier Key

Tools Required

•  14mm open-ended wrench

TORO Drafting Table

w/ Casters & Glides

Assembly Instructions

Содержание TORO






Отзывы:

Нет отзывов