wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
2
Assembly Instructions
Step 7:
•
Apply a bead of polyurethane sealant/adhesive
(provided by installer) on the full perimeter of the
frame and manully center frame to top. (There will
NOT be any pre-drilled pilot holes in the epoxy top.)
•
DO NOT attempt to use ANY hardware to attach the top
to the frame that is included in the leg packaging.
•
Table must cure for
24 HOURS
in this position before
continuing to Step 7.
Step 8:
•
After letting assembled frame and top cure for 24
hours, turn table upright with the help of another
person.
Step 7
TORO Table
Epoxy Top
Before you begin, please make sure all parts and proper
quantities are included. (See Part Identifier Key) Any parts
damaged during shipment must be reported within 24 hours of
receipt. To report information regarding damages or if you have
any questions, please call 800.242.2303.
TORO Table
Epoxy Top w/Glides
Tools Required
•
4mm hex wrench
•
Screw gun
•
#S2 square bit
Step 1:
•
Remove nylon glide from leg by rotating counter-clockwise until
glide is free.
Step 2:
•
Place stem of optional footing into the hole on the leg. Rotate
clockwise until fully inserted into leg.
Step 3:
•
Repeat for each glide.
