wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
1
Assembly Instructions
Before you begin, please make sure all parts and proper
quantities are included. (See Part Identifier Key) Any parts
damaged during shipment must be reported within 24 hours of
receipt. To report information regarding damages or if you have
any questions, please call 800.242.2303.
TORO Table
Epoxy Top
Step 1:
•
Place TORO frame on a protected flat surface.
Step 2:
•
If assembling TORO Table with fixed legs, skip to Step 3.
•
If assembling TORO Table with adjustable legs, locate
the adjustable leg insert.
•
Remove M6 screws and #12 star washers from the
adjustable leg insert using a 4mm hex wrench.
Step 3:
•
Place insert into TORO frame. Once desired height is
attained, place M6 screw through #12 star washer and
then through the hole in the fixed leg, tighten with a
4mm hex wrench.
•
Repeat with the second M6 screw and star washer.
•
Repeat this step for the remaining adjustable leg inserts.
Step 4:
•
Turn frame upright with the help of another person.
Step 5:
•
Place the top face down on a protected flat surface next
to the completed LOBO frame.
Step 6:
•
Make sure frame and top are clean and free from any
debris and/or contamination that would interfere with
adhesion of sealant applied.
Tools Required
•
1/2” wrench
•
Polyurethane sealant
Step 3
Step 2
In adhering the tops to the frames, we have found that
using a polyurethane sealant.adhesive works best in this
application. It is recommended to identify an adhevsive
sealant that when fully cured, retains it’s flexibility.
V010322 Version subject to change
