3
wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
LOBO Tables
w/ Gussets
Step 1:
• Make sure that legs are fully installed and adjusted to the
correct height.
Step 2:
• Place gusset in corner where leg and frame meet. Use
a rubber mallet to tap the #10 self-drilling screws into
place.
Step 3:
• Using a screw gun along with a 5/16” hex bit to finish
fastening the gussets to the leg and frame with the #10
self-drilling screws.
Step 4:
• Repeat for remaining gussets.
Gussets w/ Hardware Pack (04066920)
Used only with square LOBO legs
Part #
Description
Qty.
04009742
#10 Self-drilling screws
8 per gusset
04066920
Gusset for square legs
1 per leg
Gussets w/ Hardware Pack (04066918)
Used only with round LOBO legs
Part #
Description
Qty.
04009742
#10 Self-drilling screws
8 per gusset
04066918
Gusset for square legs
1 per leg
Part Identifier Key
Assembly Instructions
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key below) Any parts damaged during shipment must
be reported within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
Tools Required
• Screw Gun
• 5/16” Hex Bit
• Rubber Mallet
