507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
wibenchmfg.com
2
Assembly Instructions
for Optional Accessories
Remove Nylon glide from leg by rotating
counterclockwise until glide is free.
Place stem of optional footing into the hole on
the leg. Rotate clockwise until fully inserted into
leg.
Tighten with a 1/2” Wrench.
(only with the Dual Wheel Caster.)
Repeat for each caster or grand hank glide.
• (4) 2” Dual Wheel Locking Casters
• (4) 2.5” Grand Hank Gides
Par ts List: (per desk)
Before you begin, please make sure all parts and proper quantities are included. Any parts damaged during shipment must be
reported within 5 days of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
Par ts List: (per desk)
Tools Required
Place desktop face down on protected surface so
threaded inserts are facing up.
With legs installed, align tabs of the steel book box
with the pre-drilled pilot holes.
Use #10 screws to fasten each of the tabs of the
steel book box to the desktop.
• Screw Gun
• # R2 Square Bit
• (1) Steel Book Box
• #10 3/4” Square Pan Screws
Tools Required
• 1/2” Wrench
ELO® Desk
with 2” Dual Wheel Locking Casters
or 2.5” Grand Hank Glides
ELO® Desk
with Steel Book Box
or
