507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
wibenchmfg.com
1
V060117 subject to change.
ELO® Desk
Assembly Instructions
• Screw Gun
• 5/32” Hex Bit
• Drill Bit Extension
Before you begin, please make sure all parts and proper quantities are included. Any parts damaged during shipment must be
reported within 5 days of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
Scan or click QR
code to watch
the ELO® Desk
assembly video
Place desktop face down on protected
surface so threaded inserts are facing up.
Align leg with threaded inserts.
Connect leg to desktop with the
1/4”-20x15mm joint connector bolt. Use
six bolts for each leg.
Repeat this for each of the four legs.
Use a screw gun, 5/32” hex bit, and a
drill bit extension to tighten the joint
connector bolts to the desktop.
If optional accessories were ordered
continue to page 2 and 3.
Par ts List: (per desk)
Tools Required
Instruc tions are based on the ELO
®
Adapt Desk
• (1) ELO® Desktop
• (4) ELO® Legs
• (24) Joint Connector Bolts ¼”-20x15mm
