2
wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Assembly Instructions
for Optional Accessories
ELO® Desk/Table
with Dual Wheel Locking Casters
or 2.5” Grand Hank Glides
Step 1:
• Remove Nylon glide from leg by rotating counterclockwise until
glide is free.
Step 2:
• Place stem of optional footing into the hole on the leg. Rotate
clockwise until fully inserted into leg.
• Casters are
NOT
to be used as a leveling device.
Step 3:
• Tighten with a 14mm open-ended wrench. (only with the dual
wheel caster.)
Step 4:
• Repeat for each caster or Grand Hank glide.
Step 1:
• Place top face down on protected flat surface.
Step 2:
• Align tabs of the backpack hook with the metal inserts.
Step 3:
• Use 1/4-20x15mm joint connector bolts to fasten both of the tabs
of the backpack hook to the top.
Instruc tions are based on the ELO
®
Adapt Desk but c an be used for any ELO® Desk or Table.
ELO® Desk/Table
with Backpack Hook
Tools Required
• 14mm open-ended wrench
Tools Required
• Screw gun
• 4mm Hex bit
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key page) Any parts damaged during shipment must be
reported within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
