background image

4

Installed on the top of the door

About 2 meters above the ground is the best. Lay across, paralleled with door-frame. If door-frame is wide, installed
crosswise.
Detailed installation depends on the environment, just installed where people pass by. It can be used for reminding,
sales promotion, doorbell, visitor welcome, etc.

7.FAQ:

Q1. Why is there no sound when the human body induction is turned on?

Answer: (1) Please check whether the product successfully copied the voice;
(2) Please confirm whether the voice file is correct and whether the voice size is greater than the storage capacity of
the product. This product comes standard with 4M memory, supports MP3 format audio files, bit rate: 16-320Kpbs,
128Kpbs is recommended; (the total voice content should be less than 4 minutes )

Q2. What power supply method does the product use?

Answer: This product is powered by a 5V USB power adapter or 3 AAA dry batteries (note that when a USB power
adapter is used for power supply, a data cable and adapter with USB data reading function cannot be used)

Q3. Why can't I download the voice when I connect to the computer via Micro USB?

Answer: (1) Please make sure that the Micro USB cable is a 4PIN data cable.
(2) After the product is connected to the computer, it needs to wait about 6 seconds to successfully read the disk.

Q4. Why are there situations such as non-reporting, false alarming, and too close sensing distance?

Answer: (1) The product needs to wait 6 seconds for power-on initialization before it can work normally.
(2) This product adopts the principle of infrared pyroelectric induction, and the working temperature is 0-33

, which is

easily affected by changes in ambient temperature. Please do not approach air conditioners, fans, and other places
with large temperature differences;
(3) If the voltage of this product is too low, it will work unstable. Please confirm whether the battery is dead;

Q5. Why is there a stuttering or intermittent phenomenon when playing a voice?

Answer: (1) Please confirm whether the bit rate of the MP3 audio file is within the range of 16-320Kpbs.
(2) Please check whether the battery power is insufficient. If the voltage of this product is too low, it will work unstable.
Please replace the battery in time.

Содержание MicroSound

Страница 1: ...ory function Micro USB interface Support to replace the audio files of SPI Flash through USB interface on computer 3 AAA batteries or USB for power supply Built in 8Ω1 watt speaker 2 Electrical parameters Power supply mode DC3V 5V stabilized voltage supply or 3 AAA Batteries Working Current Sleep standby mode 100uA Playing mode 200mA DC4 7V Audio Format MP3 Bit Rate 8 320Kbps Audio Output Power 8Ω...

Страница 2: ...ns it is B mode single playback Button B Short press Play the next audio Micro USB interface Connect DC5V power adapter or computer Supply power download audio files Note 1 When switch on wait about 20S then it can work normally Within 4 meters when people or animal walk by it will trigger the sensor to play voice 2 Each time after triggering to play voice you need to wait 2S then it can trigger a...

Страница 3: ...ddenly then trigger induction Only suitable for indoor use If environment temperature is over 30 infrared induction distance will be shortened which is a normal phenomenon If environment temperature is over 37 infrared induction will be invalid because human body temperature is 37 so it cannot sense Induction distance too short Reason 1 low battery you can use regular alkaline batteries Reason 2 e...

Страница 4: ...eading function cannot be used Q3 Why can t I download the voice when I connect to the computer via Micro USB Answer 1 Please make sure that the Micro USB cable is a 4PIN data cable 2 After the product is connected to the computer it needs to wait about 6 seconds to successfully read the disk Q4 Why are there situations such as non reporting false alarming and too close sensing distance Answer 1 T...

Отзывы: