background image

Shenzhen Waytronic Electronics Co., Ltd.

MicroSound V3.11

- 4 -

again.
3. After finishing copying, sometimes there maybe invalid body induction, false dead lock, back to normal working
state with power on again.

5. Installation

Side wall mounted

About 1.5 meters above the ground is the best. About 1 meter far from the door-frame. Use the mounting holder to
fix the device, toward the door, 45°(see picture).

Installed on the top of the door

About 2 meters above the ground is the best. Lay across, paralleled with door-frame. If door-frame is wide,
installed crosswise.
Detailed installation depends on the environment, just installed where people pass by. It can be used for
reminding, sales promotion, doorbell, visitor welcome, etc.

FAQ

Question 1: Can this product play WAV audio? If not, what’s the solution?

Answer: This product only supports MP3 audio, no support to WAV audio. But there are the following solutions to
convert to MP3 format.
Solution 1: Install audio player software with the function of MP3 encoding and decoding, converting WAV audio
format into MP3 files.
Solution 2: Search online directly and download MP3 audio.

Question 2: During use, this product is found that it interrupts when playing half, then continues to play
and the cycle continues. What happened?

Answer: This is caused by unstable power, because battery power is low or voltage is unstable. Please replace
the battery.

Question 3: After power on, in a period time there is no response or reaction is not sensitive, such as

Содержание MicroSound M13






Отзывы: