WayteQ xTAB-700qci, Руководство пользователя

Страница: 8 / 19

8
III - SETTINGS
Set Up Wi-Fi Connection
Make Wi-Fi Connection In Settings

Wireless & networks

Wi-Fi, slide the Wi-Fi switch to the ON position.
Normally, the device will automatically scan the available Wi-Fi Access Point (AP). If this does not happen, select
Scan (upper right corner) to scan for the available Wi-Fi APs. Then, tap on the desired AP to make the connection.
If it is a secured AP, system will prompt you for the password. Enter it by tapping on the password entry line, and
use the onscreen keyboard to enter the password. Then, tap on the Connect to start connecting to that AP.
When connection is established, the Wi-Fi connected icon
will show up on the status bar.
Set Date and Time
Use Settings

Data & Time to open up the data/time setting screen as shown below. Select the correct time
zone. If the Wi-Fi is connected to Internet, check on the Automatic to have time set up automatically. If Wi-Fi is
not connected to Internet, uncheck
Automatic date & time to temporarily set date and time. Then, check
Automatic again before leaving the screen. In the future, when the Wi-Fi is connected to internet, date and time
will be automatically adjusted.