NOTICE
USING YOUR NAVIGATOR at the first time
1. Charge completely
2. Install into your vehicle
3. Initialize software as described in the manual
4. Make sure that the car is outside the garage and it is not covered by
anything (treed, bridges, etc)
5. Normally it takes a bit longer to receive the GPS signal the first time
you turn on the unit. Your device has to locate 3 satellites to function.
This time to find the satellites is significantly shorter after the first time
you use the device. If you move your unit over 300km without it being
used, it may need a little more time to locate the satellites again.
2
