wayscral EVERYWAY E-450 Series, Оригинальное руководство пользователя

Страница: 37 / 176

37
III. Regular checks
Check the tightness of the bolts: lever, crank, pedals, stems.
The tightening torques to be applied are as follows:
COMPONENTS RECOMMENDED TORQUE
(Nm)
SPECIAL INSTRUCTIONS
Pedals on crank arms 34 - 40 Lubricate the threads
Crank arm on bottom bracket 45 - 55 Lubricate the threads
Steering tightness 5 - 8
Headset tightening 5 - 8
Brake lever 8
Brake calipers 10
Seat 7 - 10
Seat post clamp 7 - 14
Wheel Quick clamp
The other tightening torques depend on the size of the nuts: M4: 2.5 to 4.0 Nm, M5: 4.0 to 6.0 Nm,
M6: 6.0 to 7.5 Nm. Tighten the screws evenly to the required torque.
Regularly check the tyres and in particular the condition of the tread on the rear tyre: wear, cuts,
cracks, pinching. Replace the tyre if necessary. Check the wheel rims for excessive wear, warping,
denting, cracks…
IV. Servicing
For safety reasons and to keep the components in good working order, you should have your bicycle
regularly serviced by your retailer. Your bicycle should also undergo regular maintenance by a qualified
technician.
First service: 1 month or 150 km
•
Verification of the tightening of the elements: crank, wheel, stem, pedals, handlebar, seat
clamp,
•
Check the power assistance system is working correctly,
•
Check and adjust the brakes,
•
Tighten and/or straighten the wheels.
Every year or 2000 km:
•
Check the wear levels (brake pads, gear system, tyres),
•
Check the power assistance system is working correctly,
•
Check the bearings (chain set unit, wheels, steering, pedals),
•
Check the cables (brakes, derailleur),
•
Check the lighting,
•
Tighten and/or straighten the wheels.