SPECIFICATIONS AC SPECIFICATIONS
DC SPECIFICATIONS
POWER SUPPLY REQUIREMENTS
120 V, 60 Hz
12 V, DC*
MOTOR
Single Phase, Dielectric Oil Filled
Permanent Magnet DC
POWER
1/2 HP
100 Watts
CIRCUIT REQUIREMENTS
15 A (minimum)
15 A (minimum)
DIMENSIONS
11 ½ in. high x 9 ¾ in. base
11 ½ in. high x 9 ¾ in. base
ON LEVEL
Approximately 9 in.
10-12 in.
OFF LEVEL
Approximately 4 in.
N/A
670001-001 F 07/19
© 2018, WAYNE/Scott Fetzer Company
CONSTRUCTION AC DC
MOTOR HOUSING
Coated Steel
VOLUTE
Cast Iron
IMPELLER
Glass Reinforced Thermoplastic
SHAFT
Steel
Stainless Steel
DISCHARGE
1-1/2 in. NPT
Submersible Sump Pump System
www.waynepumps.com
Intended for Indoor Use Only
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
Operating Instructions and Parts Manual WSS30Vn
PERFORMANCE GAL/HR
Model
HP
Discharge Head (Lift Distance)
0 ft 5 ft 10 ft 15 ft
WSS30Vn AC
1/2 5100
4500
3840
3060
WSS30Vn DC
12V 2700
2130
1500
720
* Battery not included. Wayne WSB1275 is
recommended
