SPECIFICATIONS
POWER SUPPLY REQUIREMENTS
120 V, 60 Hz
MOTOR
Single Phase, Dielectric Oil Filled
HORSEPOWER
1 HP .................... (CDU1000)
3/4 HP ................ (CDU980E)
1/2 HP............ (CDU800SS, CDU800,
.............................
SPF50, CDT50)
1/3 HP ........... (CDU790SS, CDU790,
................................SPF33, WST33)
CIRCUIT REQUIREMENTS
15 A (minimum)
DIMENSIONS
11-1/2 in. high x 9-3/4 in. base
ON LEVEL (FACTORY SET)
Vertical: Approximately 9 in.
Tether: Approximately 13 in.
OFF LEVEL (FACTORY SET)
Vertical: Approximately 4 in.
Tether: Approximately 7 in.
600002W-001 F 08/20
© 2020, WAYNE/Scott Fetzer Company
Submersible Sump Pump
www.waynepumps.com
Intended for Indoor Use Only
Vertical Float Switch
Tether Float Switch
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
Operating Instructions and Parts Manual Sumps
*Images are for illustration purposes only.
Not all models are shown.
CONSTRUCTION
MOTOR HOUSING
Stainless Steel,
(CDU1000, CDU980E,
CDU800SS, CDU790SS)
Coated Steel
(CDU800, CDU790, SPF33, SPF50, CDT50)
Reinforced Thermoplastic
(WST33)
VOLUTE
CDU1000, CDU980E,
CDU800, CDU800SS
CDU790, CDU790SS,
CDT50
Cast Iron
SPF33, SPF50, WST33
Glass Reinforced Thermoplastic
IMPELLER
Glass Reinforced Thermoplastic
SHAFT
Steel
PERFORMANCE GAL/HR
Model
HP
Discharge Head (Lift Distance)
0 ft 5 ft 10 ft 15 ft 20 ft
CDU1000
1
6100
5460
5100
4560
3840
CDU980E
3/4 5490
5076
4600
4100
3500
CDU800SS
CDU800, CDT50
1/2 5100
4500
3840
3060
2040
CDU790SS,
CDU790
1/3 4600
3810
3060
2220
1200
SPF50
1/2 4300
3900
3360
2700
1260
SPF33
1/3 3750
3300
2718
1920
-
WST33
1/3 3000
2610
2130
1404
400
