Wayne-Dalton ADV-X 888 Скачать руководство пользователя страница 3

www.wayne-dalton.com

827802-0001      Rev - 

3

In this section and those that follow, the words "

DANGER

", "

WARNING

", and "

CAUTION

" are used to 

stress important safety information.  The word:

DANGER

 indicates an imminently hazardous situation which, if not avoided, will result in death or 

serious injury.

WARNING

 indicates a potentially hazardous situation which, if not avoided, could result in death or 

serious injury.

CAUTION

 indicates a potentially hazardous situation which, if not avoided, may result in injury or 

property damage.

The word

 

NOTE

 

is used to indicate important steps to be followed or important considerations

.

1. Read manual and warnings carefully.

2. All models are equipped with an over current 

device.  This must be manually reset following 
an over current condition.

POTENTIAL

HAZARD

EFFECT

PREVENTION

MOVING DOOR

 WARNING

Can Cause Serious 

Injury or Death

Do NOT 

operate unless the doorway is in sight and free of obstructions.  Keep people clear of 

opening while door is moving.

Do NOT 

change control to momentary contact unless an external reversing means is installed.

Do NOT

 operate a door that jambs.

OVERVIEW OF POTENTIAL HAZARDS

READ THIS SAFETY INFORMATION

O

R

O PO

RDS

SECTION 1 - SAFETY INFORMATION

High Speed Metal Doors doors are large, heavy objects that move with the help of electric motors.  Since 
moving objects and electric motors can cause injuries, your safety and the safety of others depends 
on you reading the information in this manual.  If you have any questions or do NOT understand the 
information presented, call technical support at 1-800-764-1457 option 4. 

WARNING

Содержание ADV-X 888






















Отзывы: