Wayne and Layne Tactile Metronome Скачать руководство пользователя страница 10

Страница: 10 / 10

notch lines up with the notch on the board.

Step 15:

Give the completed board a final look over, checking for loose solder connections or shorted pads.

Congratulations! You’re now the proud owner of a Tactile Metronome. Install some AAA batteries and

give it

a try!

Edit this

About

Wayne and Layne, LLC makes open source hardware. Our kits
come with easy-to-follow illustrated instructions and
explanations of how the kit works. All the schematics, PCB
artwork, and source code are provided under open licenses.

Our debut kit, the

Tactile Metronome

, is an easy-to-make tap

tempo beat looper.

Upcoming Events

Wayne and Layne will be at the 2011 Bay Area Maker Faire.

Search

Build Instructions, Printable Version | Wayne and...

http://www.wayneandlayne.com/projects/metron...

10 of 10

05/11/2011 04:43 PM

Содержание Tactile Metronome











Результаты поиска

Содержание Tactile Metronome

Отзывы:

Бренды по названию

Популярные бренды

Wayne and Layne Tactile Metronome, Инструкции по сборке

Результаты поиска

Содержание Tactile Metronome

Отзывы:

Бренды по названию

Популярные бренды