Waykar PD1201B, Руководство пользователя

Страница: 10 / 20

Humidity Setting
In power-on status, press "Up" or "Down" button to enter the humidity setting status:
The screen will display the "Setting " and " Humidity Display " icon, the unit icon " RH%"
will light up, and the large figure "
" will flash to show the humidity value.
5 2
In humidity setting status, you can press the "Up" or "Down" button to set the desired
humidity within the range of 10-98RH%.
If you press the "function" button or no operation after seconds, you will exit the
humidity setting status automatically.
When the setting humidity is 10RH%, the machine will be forced to run at continuous
working mode.
Timer Setting
In power-on status, press the "Timing"button, you will enter the Timer setting mode:
The " " will point at "Setting Time" function, the time unit "h" will light up and the
small figure "
" will flash to show the setting value.
77
In Timer setting status, press "Up" or "Down", you can set a time within the range of 1
to 24 hours, which can be set again if invalid.
If you press the "function" button or no operation after seconds, you will exit the
humidity setting status automatically.
If the time it's set to be " ", this is called the invalid time.
0 0
Speed Setting
Two wind speed modes are available for this machine, you can press the "Speed"
button to switch to high or low wind speed.
Parameter Query
In power-on status, press the "Function" button once, you will enter the parameter
query status.
The " " will point at "Setting Temp.", the small figure will display the setting
temperature and the temperature unit "
℉
" will light up. Press the "function" button
again, you will be able to query the ambient temperature and setting time.
Status Description
When the fan is delayed, the running symbol " " will flash, and if the fan is running,
the running symbol " " will be on, otherwise it will be off.
When the compressor is delayed, the dehumidification symbol " " will flash, and if
the compressor is running, the dehumidification symbol " " will be on, otherwise it
will be off.
Operation