Waykar DP900B, Руководство пользователя

Страница: 8 / 18

P.04
2. Setting
When the unit is ON, press [POWER] to enable Standby mode. Then the unit stops working
and the standby indicator turns on.
When the unit is OFF, press [POWER] to turn on the unit. Then the unit starts working and
the standby indicator turns off.
Power
Humidity Setting
When the unit is ON, press [Up] or [Down] to enter the humidity setting. The humidity
display
flashes and humidity " " flashes to show the level. Press [Setting] again or
wait for a while, to exit the setting.
When setting the humidity, press [Up] or [Down] to adjust the humidity level between 10-
90%RH (noncycle setting). Press [Up] once to increase 1%RH of the humidity level, while
press [Down] once to decrease 1%RH of the humidity level. Hold the buttons to
continuously increase/decrease the level. When setting finished, press the [Setting] once or
wait for seconds to exit the humidity setting.
Timer Setting
If setting up the timer in OFF mode, then it's the power-on delay. If setting up the timer in
ON mode, then it’s power-off delay. But if the timing hour is 00h, the setting will be invalid.
When the dehumidifier is on, press [Timer] button to enter timing setting. The timer icon
lights on, and the number " " flashes and shows the remaining working hours. Press
[Timer] again or wait for seconds to exit the setting. In the timer setting, press [Up] or
[Down] to adjust the timing hours between 00-24 (noncycle setting). Press [Up] once to
increase one hour while decrease one hour with button [Down]. Hold the buttons to
continuously increase/decrease the hours. When setting finished, press [Setting] once or
wait for seconds to exit the timer setting.
Continuous Dehumidifying
Set up the humidity level at 10% RH, and the unit will enter continuous dehumidifying mode
(the icon lights). The dehumidifying is not affected by the humidity level has been set
before.
OPERATION
DESCRIPTIONS
MAX