Waygate Technologies Krautkramer USM 100, Руководство по эксплуатации, Страница: 228 / 330

5 Operation Display
228 Rev. 9 (09/2023) Krautkrämer USM 100
Thickness Palette
You can switch on a simplified color palette for evaluat-
ing wall thickness measurements in the C-scan (see
page 237).
The wall thickness palette consists of five fixed colors
for different wall thickness ranges that you can define
(see following settings).
You can only switch on the wall thickness palette if
TOF A is selected in the Data Source setting (see
page 226).
Thickness
This function is only available when the thickness pal-
ette is switched on.
This is the same function as in the function group
Material Probe (see page 132).
TMin
This function is only available when the thickness pal-
ette is switched on.
Enter the value for the minimum wall thickness. Wall
thicknesses up to this value are displayed in green in the
C-scan.
Zone 1
This function is only available when the thickness pal-
ette is switched on.
With reference to the minimum wall thickness entered in
the
TMin setting (= 100 %), select a wall thickness value
in percent.
Example:
Thickness : 50 mm
TMin : 40 mm
Zone 1 : 90 % = 36 mm
Wall thickness measurements below TMin up to the
percentage value selected here are shown in blue in the
C-scan. Based on the example, these are all values be-
tween 40 mm and 36 mm.