Waygate Technologies Krautkramer USM 100, Руководство по эксплуатации, Страница: 118 / 330

5 Operation General settings
118 Rev. 9 (09/2023) Krautkrämer USM 100
Remote Connection
The USM 100 supports Virtual Network Computing
(VNC).
The VNC client displays the screen contents of a remote
device on a local computer (client) and in return sends
keyboard and mouse movements of the local computer
to the remote device.
The settings in the Remote Connection section allow
you to configure the instrument for remote control via a
network.
For the complete remote connection setup procedure
see page 63.
Wired IP / WiFi IP
When the USM 100 is connected to the network via LAN
(see page 269) or WLAN (see page 270), the current IP
address is displayed here for information. You cannot
set anything here.
Port Number
For security purposes, you can set a specific port for the
connection. The default port for VNC connections is
5900.
Password
You can set a password for remote access. If a pass-
word is set, you must enter it when establishing a con-
nection.
Allow Remote Access
You can allow the remote access via the network either
for viewing the screen only (eye icon) or for full remote
control (eye/mouse icon) of the USM 100. If the X icon
is marked, the remote access is blocked.
Remote Command
This function is reserved for service tasks.