XL ™ VideoProbe
®
21
3 - Getting Started
Battery Charge Level
Check the battery charge by pressing the battery symbol on the front
of the battery. Each light represents approximately 20% of the battery
charge capacity.
Charging Battery
Plug the included AC to DC power adaptor into a suitable AC power
source and connect the DC output of the battery charger into the XL
battery. The LED battery lights will illuminate according to the
amount of charge attained. The system may operate while charging.
The battery may also be charged while disconnected from the system.
Note:
When the battery is fully charged, the LED battery lights will turn off.
Note:
Battery run time approximately equals battery charge time;
therefore, a four hour battery will take approximately four hours to
charge.
DC Battery Charging Jack
Charge Indicator LED’s
Содержание Everest XL Detect VideoProbe
Страница 1: ...Everest XL Detect XL Detect VideoProbe Operating Manual...
Страница 7: ...XL Detect VideoProbe 7 1 Introduction...
Страница 51: ...XL Detect VideoProbe 51 4 Common Tasks...