PARTS
(included)
Table Top (2)
2”
x2
”
x36
”
Strips (2)
Table Leg Assemblies (2)
Bench Tops (4)
1”
x5½
”
x14½
”
Bench Leg Supports (8)
1”
x5½
”
x32
”
Bench Bottoms (4)
HARDWARE
(included)
2¾
”
Wafer Head Bolts (4)
2”
Screws (75)
Allen Wrench (1)
Square Drive Bit (1)
TOOLS NEEDED
Power drill or screwdriver
STEP 1
Lay the table tops upside down and bolt together. Insert the four 2¾
”
bolts in the predrilled holes in one
side and turn into the threaded inserts with the Allen Wrench. (See photo 1.) Now attach the
2”
x2
”
x36
”
strips as shown. Place ends in the corners and center of strip against the preinstalled 2x2 strips on the
table top. Fasten with six
2”
screws in each strip and turn into the table top. (See photos 1 & 2.)
photo 1
photo 2
*Keep 2x2 even with outside edge of leg supports*
photo 3
photo 4
photo 5
STEP 3
Unfold a table leg assembly and place upside down on a table. (See photo 4.) Take a bench top and place
upside down with the center 2x2 between the 2x4 leg support beams. Attach with two
2”
screws on each
side. (See photos 4 & 5.)
Predrilled
holes in leg
supports
belong at
this end
STEP 2
Assemble the four bench legs. Take two leg supports and attach to a bench bottom. Put two
2”
screws in
the predrilled holes in each end of the bench bottom and screw into one end of the leg supports. (See
photo 3.)
