Figure 1
Unpack and lay parts on a clean,
padded surface like carpet or a
blanket. Check that you have all
parts indicated on the front page.
Lift the Velcro strip from the
bottom of the Seat (B).
Figure 2
Attach Seat (B) to Back Panel (A)
with a Short Bolt (1), Spring
Washer (5) and Flat Washer (4).
Tighten them using Allen wrench
(6) as shown in Figure 2.
Figure 3
Insert a Long Bolt (2),
Flat Washer (4) and Spring
Washer (5)
into the Seat (B) using
the corner pre-hole.
Tighten the Long Bolt (2) using
the Allen wrench (6) as shown in
Figure 3.
Assembly Instructions
A
4
5
1
6
B
BAR STOOL
