Waycon WAY-AX, Руководство по установке

Страница: 21 / 48

Seite 21 / 48
5.4. IN 1 Totalization
The totalization function is defined in this menu. This menu will only be showed, if the totalization is active in
Menu IN 1 PROPERTIES.
The totalizator depends on the operation mode. See in the following list.
Operation mode
Totalisation
INPUT 1 TOTAL INPUT 2 TOTAL LINKAGE TOTAL
SINGLE
active

0

0
DUAL
active active

0
IN1 + IN 2
active active Total 1 + Total 2
IN1 – IN 2
active active Total 1 – Total 2
IN1 x IN 2
active active

0
IN1 / IN 2
active active

0
TIME BASE
This parameter defines the time base of the totalization.
It defines the time interval between the recordings of data.
0 SECONDS The current value is added to INPUT 1 TOTAL every second
1 MINUTES
The current value is added to INPUT 1 TOTAL every minute
2 HOURS
The current value is added to INPUT 1 TOTAL every hour
3 COMMAND
The current value is added to INPUT 1 TOTAL, when using the command (ADD TO
TOTAL 1) for the operation function at the control input (see Command Menu)
DIVIDER
This parameter defines the devisor for the totalization.
0 1 No division
1 10 The result of the totalization is divided by 10
2 100 The result of the totalization is divided by 100
3 1000 The result of the totalization is divided by 1000
DECIMAL POINT
This value defines the position of the decimal point.
0 NO
No decimal point
1 0000000.0
Decimal point at the specified position
2 000000.00
Decimal point at the specified position
3 00000.000
Decimal point at the specified position
4 0000.0000
Decimal point at the specified position
5 000.00000
Decimal point at the specified position
6 00.000000
Decimal point at the specified position
7 0.0000000
Decimal point at the specified position