FEATURE
- Dual band with maximum speed up to 5G 867Mbps and 2.4G 300Mbps.
- Weatherproof and build in lightning arrested withstand harsh outdoor conditions.
- Four 7dBi omnidirectional antennas eliminate Wi-Fi dead zones.
- High power amplifier for stronger signal transmission.
- Gigabit port provides faster connection.
- Passive PoE support for flexible deployment.
- Support AP/Router/Repeater/EasyMesh agent mode.
- MU-MIMO function lets the router talk to several devices simultaneously over the same
Wi-Fi band.
HARDWARE OVERVIEW
Top view
Bottom view
DEFAULT PARAMETERS
Web:
http://wifi.wavlink.com
2.4G SSID:
WAVLINK-N XXXX
Default IP:
192.168.10.1
5G/AC SSID:
WAVLINK-AC XXXX
Login Password:
admin
Wireless Password:
open
LED INDICATORS
1
2.4G RP-SMA Antenna Connectors
2
S5G RP-SMA Antenna Connectors
3
3 x Wi-Fi Signal LEDs
4
Status LED
5
WAN/LAN LED
6
LAN Backhaul LED
7
POWER LED
8
Reset/PAIR Button
9
LAN Backhaul Port
10
WAN (PoE IN)/LAN Port
11
Grounding Terminal
WI-FI SIGNAL
Mode
Description
AP
ON
ON
ON
Wi-Fi signal output power 100%.
Repeater
ON
ON
ON
Better reception: signal 81%-100%.
ON
ON
OFF
Good reception: signal 60%-80%.
ON
OFF
OFF
Weak reception: signal below 0-59%.
INSTALLATION
1. Please follow the installation steps when assembling the device.
1
Pass RJ45 cable through the spiral
cover
2
Pass RJ45 cable through the rubber
seal
3
Pass RJ45 cable through the holder
4
Connect the RJ45 cable to PoE IN/
WAN port
5
Spin 2.4G antenna into the 2.4G
external RP-SMA connector
6
Spin 5G antenna into the 5G external
RP-SMA connector
7
Screw the holder
8
Plug the rubber seal to the holder
9
Screw the spiral cover
2. Install the device.
2.1 Firstly, fasten the device to somewhere firm, then install the device in the holder.
Remark
If you happen to live in the zone where lightning happens a lot, we suggest that you install
the device through grounding connection in order to strengthen the lightning-resistant
function.
Power
On
The device is powered on.
Off
The device is not receiving electrical power.
LAN/Backhaul
On
The Ethernet port is connected.
Off
The Ethernet port is disconnected.
WAN/LAN
On
The Ethernet port is connected.
Off
The Ethernet port is disconnected.
Status
Fast flash
Another router has not been connected when the
device is the repeater mode.
SHOW flash
The another router has been connected but
the device has no access to the network in the
repeater mode.
On
The device keeps on in the AP mode;
The device can access the network normally.
1
2
3
4
5
6
7
1
2
8
11
10
9
1
9
2
8
3
7
5
4
6
TV LED/LCD
FLOOR STAND
AC1200 DUAL BAND HIGH-POWER
OUTDOOR ROUTER/AP/EXTENDER
USER'S
MANUAL
- 1 -
