![background image](http://html1.mh-extra.com/html/wavion/ws-410ad/ws-410ad_installation-manual_878220027.webp)
Installing the Wavion WS-410 Metro Access Point
Installation Guide
27
Connecting Antennas
This section explains how to connect the six antennas to the WS-410. In order for the
WS-410 to work properly, six antennas must be connected.
Screw each of the 6 antennas into the an N-Type connectors on the WS-410.
Figure 3.16. Connecting the Antennas
The successful insertion of six antennas should look as follows.
W
ARNING
:
Only connect the unit to the power supply once all the antennas are
connected.
W
ARNING
:
Use caution when connecting the antennas. Undue haste can damage the
unit.
W
ARNING
:
Do not screw in the antenna when holding the top section of the antenna.
You will most likely damage the antenna.
Содержание WS-410AD
