WBSn-2450 User Guide
Page - 19 -
3.2.2
IP Management
To Configure a Management IP address
1.
Navigate to Configuration => Network => IP Configuration, select the line you wish to update
and click Edit.
2.
In the popup window, modify the default IP address values provided:
Parameter
Description
IP Address
Change the default IP address
IP Method
Select either Manual or DHCP
For Manual:
•
Enter the required static IP, and valid static Network Mask, Gateway
and DNS parameter values in the relevant parameters.
For DHCP:
•
Enter the DHCP Client Fallback IP Address and Network mask in the
relevant parameters.
Mask
Enter the required network mask
Gateway
Specify the gateway for the Management IP address
MTU
Maximum Transmission Unit
3.
Click Apply, at the bottom of the Wavion EMS screen.
Note: If you change your current IP address, the connection to the unit will be lost. You need to
enter the newly specified IP address in the URL.
4.
Navigate to Configuration => System => Management IP Address, and modify the default
values provided.
5.
Select the required VLAN to be used for management purposes, from the list of available VLANs.
6.
Specify True or False for the Enable management from Wireless Access Interfaces
parameter, in order to enable or block a specific wireless device from having management access.
The default parameter is True.
