© 2012 Wavetronix LLC. All rights reserved. Protected by U.S. Patent Nos. 6,556,916; 6,693,557; 7,426,450; 7,427,930; 7,573,400; 7,889,097; 7,889,098; 7,924,170; 7,991,542 Cdn.
Pat. Nos. 2461411; 2434756 and Euro. Pat. Nos. 1435036; 1438702; 1611458. Other U.S. and international patents pending. Wavetronix, SmartSensor, Click, Command and all as-
sociated logos are trademarks of Wavetronix LLC. All other product or brand names as they appear are trademarks or registered trademarks of their respective holders. Product
specifications are subject to change without notice. This material is provided for informational purposes only; Wavetronix assumes no liability related to its use.
7
Install the SmartSensor Manager (SSM) software
8
Make a connection
1
Attach a serial cable to the RS-232 or RS-485 port of a surge protection module.
2
Once SmartSensor Manager is open, select the type of connection you want to make (Serial, Modem
or Internet).
3
Click
OK
.
After you are connected, the Lane Configuration page will appear, allowing you to automatically configure
the SmartSensor V.
1
Find the setup program from the Wavetronix website by going to www.wavetronix.com, clicking on the
Support
tab, choosing the
SmartSensor
product line, and choosing
SmartSensor V
from the drop-
down menu.
2
To install, simply download the file to your local machine.
3
Double-click on the SSM icon to open SmartSensor Manager.
WX-500-0217
