WX-500-0317
© 2020 Wavetronix LLC. All rights reserved. Protected in the US by patents viewable at www.wavetronix.com/en/legal. Protected by Canadian Patent Nos. 2461411; 2434756; 2512689; and European Patent Nos. 1435036;
1438702; 1611458. Other US and international patents pending. Wavetronix, SmartSensor, Click, Command and all associated logos are trademarks of Wavetronix LLC. All other product or brand names as they appear are
trademarks or registered trademarks of their respective holders. Product specifications are subject to change without notice. This material is provided for informational purposes only; Wavetronix assumes no liability
related to its use.
10
Verify the connection
For verifying the connection, see Part 3 of this guide or follow the steps below to per-
form a link test on the device.
1
Press the push-button on the faceplate of the device, then release when the blue
LED blinks. While the link test is running, the red LED will glow solid and the green
LED will blink.
2
Watch the LEDs. The blue LED will come on to indicate that there is a connection
to the external Bluetooth device you connected to in Part 5. If the connection is no
longer valid, the blue LED will never come on and the device LED will remain in
the state outlined in step 1.
3
To check if the data is being pushed to the laptop or handheld is good, open a
terminal emulation program such as HyperTerminal and connect to the Bluetooth device. Observe the data being re-
ceived. It should be the alphabet repeated continuously; if nothing comes or any letters are missing, the data is not being
received or is corrupted.
4
Once the test is complete, the devices must be taken out of Link Test mode in order to operate. Press and release the
push-button to exit the mode.
