Wavetronix click 301 Скачать руководство пользователя страница 6

Страница: 6 / 13

6 of 13

WX-501-0531 • 01.22

the driver to the settings currently saved on the Click 301, erasing any unsaved changes.

Upgrade

can be used

to manually upgrade to the most current firmware for your device.

Hex View

changes the view of certain settings

in the driver to hexadecimal.

■

Clicking the

Quit

menu exits the driver and returns you to the Click Supervisor main page.

Expert

The Expert driver allows you to see all possible settings and fields, both those available in other drivers and those

available only through this driver. The driver is divided into three tabs—

System

Ethernet

, and

Diagnostics

—which

are then subdivided further.

The

System > General

tab combines elements of the Setup and About tabs from the other drivers (see the figure

and table below).

Setting

Description

Module

Shows the last driver (besides Expert) that was loaded onto the device.

Driver

Names the driver you are currently working with.

Description

Shows a description of the device being configured. This is only for your information and does not

affect the operation of the device.

Location

Displays the location of the device being configured. This is only for your information and does not

affect the operation of the device.

Serial Number

Displays the serial number of your device.

Firmware Version

Shows the version of firmware your device currently has installed. If Click Supervisor detects a

discrepancy between this version and the most current version it currently has access to, you will

be prompted to upgrade when you connect to the device.

Subnet ID

Shows the subnet ID number. This option is currently not available.

Device ID

Gives the ID number of the device being configured, which is used to identify the device when

you are connecting to it. By default, this number is the last five digits of the serial number, which

can be found under the About tab or on the barcode sticker on the bottom of the device. It is

recommended that you do not change this number unless another device on the network has the

same ID number.

The

System > Comm

tab allows you to configure how the Click device communicates (see the figure and table below).

Содержание click 301














Результаты поиска

Содержание click 301

Отзывы:

Похожие инструкции для click 301

Бренды по названию

Популярные бренды

Wavetronix click 301, Инструкция по использованию

Результаты поиска

Содержание click 301

Отзывы:

Похожие инструкции для click 301

Бренды по названию

Популярные бренды