manualshive.com logo in svg

Wavetek MS1200, Руководство по эксплуатации

Поделиться
Скачать
Wavetek MS1200 Скачать руководство пользователя страница 18

18

Tip

You can change the name of the USER DEFINED (CUSTOM)
test point. Notice that the edit box appears when this test point is
highlighted. When you press the 

 key, the edit box becomes

active and you can enter any name up to fifteen characters long. Be
sure to press the 

 key when finished to terminate your entry.

You can edit the limits for the highlighted test point by pressing the

 soft key. The limits appear on the screen.

You can selectively enable or disable each individual limit.  When a
limit is disabled, your microStealth excludes it when checking
limits. If the highlighted limit is disabled, you can enable it by

pressing the 

 soft key. A check mark appears in the left-hand

column to indicate when a limit is enabled. If the limit is already

enabled, pressing the 

 soft key disables it.

Note

If you disable all of the limits within a test point, the test point
becomes disabled.  You cannot enable a test point that has no
enabled limits.

Содержание MS1200
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды