22
Audio Offset 2 (DUAL type only)
This is the offset between the video and second audio
carriers in MHz.
When you are finished editing the channel, press the
soft key
to return to the channel list.
Tip
Notice that the selected channel number is displayed in the upper
right-hand corner of the parameter list. When the list is active, you
can use the left or right arrows to select the previous or next chan-
nel in the plan. You can also use the numeric keys to directly enter
a specific channel number.
SELECT SCAN CHANNELS
Press the
key to specify which carriers will be measured on the
SCAN screen. A list of all enabled channels in the current plan
appears.
Up to six SCAN channels can be selected. To select a SCAN
channel, use the up or down arrow to highlight the desired channel
in the list, then press the
soft key. A check mark will appear in
the left-hand column of the list indicating that this is now a SCAN
channel. Also, the channel number will appear in one of the six
boxes above the list. Press the
key a second time to deselect
the SCAN channel.
