12
Installation -
Cabling
1. Using a PoE-Enabled Switch
The Camera is PoE-compliant, allowing transmission of
power and data via a single Ethernet cable.
PoE eliminates the need for the different cables used to
power, record, or control the camera. Follow the illustration
below to connect the camera to a PoE-enabled switch using
an Ethernet cable.
2. Using a Non-PoE Switch
If a PoE-enabled switch is not used, use a power adaptor
for power transmission and non-PoE switch for data
transmission.
Follow the illustrations below to connect the camera
without a PoE-enabled Switch.
Two Options
Use a PoE-enabled swtich to connect data and power through a single cable and begin viewing and recording images instantly.
A non-PoE switch will require an adaptor for power transmission.
Ethernet Cable
Ethernet Cable
Power
1
Power Connection
Please, check the voltage and current capacity of rated
power carefully.
2
Network Connection
Connect the crossover cable into the RJ-45.
1
Power
1
Power
2
Network
2
Network
Rate Power
Power
Consumption
PoE
DC 12V
3.7W
IEEE 802.3af class2
