10
Installation -
Cabling
1
Power Connection
Please, check the voltage and current capacity of rated
power carefully.
2
Network Connection
Connect the crossover cable into the RJ-45.
3
Audio Input
Connect the ‘Audio In’ cable of the camera to the device
like microphone.
4
Audio Output
Connect the ‘Audio Out’ cable of the camera to device like
speaker.
Audio Out supports only RTSP Back channel function.
It plans to make it available on the web later.
5
Alarm Output
It connects to the alarm lights, siren or lamps and the
sensor types are normal open and normal close.
Cable of the alarm output device should connect to DO1
(N.O.) and DO1 COM of the cable slot.
6
Alarm Input/Sensor
Cable of the sensor/alarm input device should connect to
White and Yellow line of the Alam cable.
1
Power
2
Network
4
Audio Output
3
Audio Input
5
Alarm Output
6
Alarm Input
6
Alarm In
5
Alarm Out
Rate Power
Power
Consumption
PoE
DC 12V
10.2W
IEEE 802.3at
DI (+)
WHITE
DI (-)
YELLOW
DO (-)
SKY BLUE
DO (+)
GRAY +DOT
N.C
N.O
In 1
COM
In 1
COM
In 1
COM
In 1
COM
