Copyright © 2020 Wavesplitter AV Technology
|
Wavesplitter .com
TEL
：
1-510-0651-7800
：
OPERATION MANUAL
Panel control
Video switch operation
The signal switch includes 9 switching channels, which can be configured as input/output according to the requirements, forming
a matrix of 1x9 - 9x1, which can switch to any input signal to 1 output or all output.
The specific operation is as follow:
❶
Switch Output 1 to Input 7
Operation: Press the Output area’s number “1”+ Press the Input area’s number “7” to complete the switch.
❷
Switch Output 1,6,8 to Input 9
Operation: Press the Output area’s number:“1”,“6”,“8”+ Press the Input area’s number “9” to complete the switch.
❸
Switch All Outputs to Input 5
Operation: Long press any number at Output area + Press the Input area’s number “5” to complete the switch.
❹
Process Input 3 as video wall mode
Operation: Long press the Input area’s number “3” to complete the switch.
Video Setting
The video interface has ten sub-menus: Output 1-9 and ALL.
After selecting the “Output X”, there will have 7 sub-menus.
