Copyright ©2020 Wavesplitter AV Technology
|
Wavesplitter .com
TEL
：
1-510-0651-7800
：
V2
OPERATION MANUAL
Introduction
The WST-PEX005 Extender is a simple to use plug and play solution which lets the user extend HDMI signals up to 60m using a single
low-cost Cat.5/6 UTP cable (not included). Supporting resolutions up to Full HD 1920x1080@60Hz, video content can be seen with
incredible clarity at distances up to 60m, which is perfect for a variety of AV and digital signage applications. Power over Cable (PoC)
functionality enables the Extender to operate from a single power supply connected to the Transmitter, allowing the Receiver to be
positioned where there is limited access to power.
Key Features
⚫
High definition resolution up to Full HD 1080p@60hz YUV4:4:4
⚫
Transmit over 60m CAT5e/6 without signal loss.
⚫
Supports 3D.
⚫
Support LPCM2.0 48KHz
⚫
DC 5V/1A; supports PoC power supply
Package Contents
Transmitter x 1
|
Receiver x 1
|
5V/1A Multi-Country Power Adapter x 1
Panel Description
Connecting and operating
1.
Connect 1 source such as a Blu-Ray Player, game console, STB, etc. to the HDMI input on the transmitter
．
2.
Connect 1 display such as an HDTV or HD Projector to the HDMI output on the receiver
．
3.
Connect a single Category 5e / 6 / 7 up to (60m) to both transmitter and receiver.
4.
Power on the transmitter firstly, then power on the source and sink.
