Copyright © 2020 Wavesplitter AV Technology
|
Wavesplitter .com
TEL
：
1-510-0651-7800
：
OPERATION MANUAL
Introduction
This 1x4 / 1x8 splitter extender is a simple to use plug and play solution that allows users to extend and HDMI signal up to 50m and
then distribute that signal to four displays using Cat.6 UTP cable (not included). For added convenience IR signals 38-56 kHz can
also be extended using the supplied IR receiver and emitter cables.
It can support resolution up to 1920x1200, including 1080p, 3D. An integrated HDMI loop-through output enables simultaneous
viewing so that local display can be connected for monitoring or create an additional viewing zone for larger installations , the
HDMI loop-through port can also be used to cascade up to 4 layers allowing up to 16 / 32 displays to be connected to a single
source.
Key Feature
Distribute 1 HDMI signal to 4 or 8 identical UTP outputs synchronously with 1 looping HDMI output.
Transmit over 50m single Cat.6 cable can be cascaded for 4 layers.
Supports resolutions up to Full HD 1920x1200@60Hz 4:4:4 8bit, including 3D.
With wide-band Bi-Directional IR control (38-56KHz).
Supports Dolby®、TrueHD、DTS-HD®、Master Audio™.
EDID management.
Must be used in conjunction with WST-PEX003 (Receiver).
Allowing to be used with WST-PEX001 / WST-PEX002 (1x4 / 1x8 Splitter Extender).
Package Content
WST-PEX001
1x4 Splitter Extender x 1
|
12V/2A Multi-Country Power adapter x 1
|
IR Emitter x 1
|
IR Receiver x 1
|
Brackets with screws x 2
WST-PEX002
1x4 Splitter Extender x 1
|
12V/3A Multi-Country Power adapter x 1
|
IR Emitter x 1
|
IR Receiver x 1
|
Brackets with screws x 2
WST-PEX003
Extender Receiver x 1
|
5V/1A Multi-Country Power adapter x 1
|
IR Emitter x 1
|
IR Receiver x 1
|
Panel Description
WST-PEX001
